Premium SanKing UPVC Hybrid Ball Valve
Seamlessly transition your plumbing from threaded equipment directly to hard PVC pipes with the SanKing Hybrid Thread-to-Slip Ball Valve from Atradesen.com. This ingenious composite flow control valve features a standard female thread on one end and a smooth gluing socket on the other, completely eliminating the need for bulky extra adapters in your tight aquarium cabinet or industrial manifold.
🌟 Advanced Flow Control & Hybrid Design
-
2-in-1 Hybrid Connection: The red side features a Female Pipe Thread (FPT) to screw directly onto pumps, reactors, or bulkheads, while the opposite dark grey side is a smooth slip socket ready to be permanently glued to your rigid PVC pipe.
-
100% Full Shut-Off: The precision-machined internal core creates an impenetrable seal when closed, essential for safely isolating plumbing lines during equipment maintenance.
-
Compact & Stealthy: The streamlined grey-black body blocks internal algae growth and saves precious space, while the vibrant red components allow for easy, highly visible flow adjustments.
⚠️ Dual-Installation & Sizing Guide (Crucial!)
This valve requires two completely different sealing methods! Please read the Atradesen.com rules carefully to avoid cracking the fitting:
-
🚨 SIZING LOGIC: The sizes listed (e.g., 20mm x 1/2") mean the dark grey socket has an Inner Diameter (I.D.) of 20mm (which sleeves OVER a 20mm Outer Diameter pipe), and the red threaded end is a standard 1/2 Inch Female Thread.
-
🚨 Threaded Side (Teflon Tape REQUIRED): You MUST wrap your male fitting with Teflon/PTFE plumber's tape before screwing it into the red female port. DO NOT OVER-TIGHTEN! Over-tightening metal fittings into plastic threads will crack the valve body! Never use glue here!
-
🚨 Smooth Socket Side (PVC Glue REQUIRED): PVC waterproof adhesive/cement MUST be used on the dark grey smooth slip joint to secure your PVC pipe permanently.
