Premium PTFE Waterproof Breathable Vent Valve
Protect your sealed systems and balance internal air pressure safely with the Advanced Breathable Vent Valve from Atradesen.com. Ideal for DIY aquarium CO2 generators, homebrew fermentation buckets, and sealed pipelines, this high-tech micro-valve acts as a one-way breather: it allows gases to pass freely with ultra-low resistance while completely isolating and blocking unpressurized water and vapor!
🌟 Advanced Polymer Membrane Technology
-
PTFE & FKM Construction: Housed in a durable PP plastic shell, the core utilizes a medical-grade PTFE (Polytetrafluoroethylene) polymer membrane and premium FKM (Fluororubber) O-rings. It provides outstanding resistance to chemicals, aging, and extreme environments.
-
Moisture & Pressure Balance: Automatically equalizes pressure differences between the inside and outside of a sealed container while preventing external moisture from contaminating your culture or fluids.
-
Versatile Configurations: Available in 180° (Straight), 90° (Elbow), and 0° (Parallel) barbed designs to neatly organize your 4mm airline tubing in any tight space.
🚨 INSTALLATION & PRESSURE WARNINGS (CRUCIAL!)
This is a specialized gas valve, NOT a standard liquid shut-off valve! Please read the Atradesen.com rules carefully:
-
⚠️ DIRECTIONAL INSTALLATION (THE RED DOT): The side marked with the RED DOT is the AIR INLET. Gas flows strictly from the red dot side to the opposite side. If installed backward, the system will not vent!
-
🚨 WATER PRESSURE WARNING: The PTFE membrane completely blocks unpressurized liquids and gravity drips. However, if installed on a pressurized water line (like a water pump output), slight liquid leakage WILL occur! Never use this to block pressurized water!
-
Tubing Sizing: The barbed nozzles are designed for a tight friction fit into standard silicone or vinyl soft hoses with an Inner Diameter (I.D.) of approximately 4mm (3/16 inch).
