Automatic 360-Degree Rotating Sprinklers & Fogging Nozzles (Agriculture, Garden & Cooling)

Upgrade your automated water delivery system with our comprehensive automatic rotating sprinkler and fogging nozzle series, available at Atradesen.com. Molded from premium, weather-resistant engineering PE, POM polymers, and industrial solid brass, this multi-style nozzle family offers specialized spray patterns for agricultural irrigation, landscaping turf watering, rooftop heat-reduction, and construction site dust suppression.

Available in both rapid fast-shear and mechanical leverage ratchet styles, these cutters ensure clean, square cuts, preparing plastic lines perfectly for secure fittings and solvent-welded joints.

Three High-Performance Irrigation Styles

• Butterfly, Rectangular & Refraction Sprinkler Heads (Models 1-4): Designed for low-to-medium pressure systems, utilizing water flow impulse to rotate internal turbine impellers or deflector plates. Provides extremely uniform, soft rain-like drops, ideal for delicate vegetable seedlings, nurseries, and greenhouses.
• Impact Rocker Sprinklers (Models 5-7): Symmetrical spring-loaded swinging rocker arm design. By frequently deflecting the high-speed water stream, it sweeps up to 360 degrees, throwing water further across wide turf zones, agricultural plots, or golf courses. Adjustable arc lock allows sector or full-circle coverage.
• Atomizing & Fogging Nozzles (Models 8-10): Delivers fine micro-mists and highly atomized fog. Available in impact-resistant POM plastic or heavy solid brass. Ideal for poultry shed cooling, greenhouse humidity control, and aerial dust suppression.

⚠️ Critical Water Pressure & Filtration Guidelines

• Water Pressure Requirement: To ensure proper rotation and effective spray coverage, we highly recommend maintaining a pipeline water pressure of at least 2.0 bar (2 kg/cm² / approx. 29 PSI). Standard municipal tap water pressure is typically 2.0 to 3.0 bar. For large-scale setups with multiple sprinklers, incorporating a dedicated booster water pump is highly recommended.
• In-Line Filtration Warning: If your water source contains sand, suspended silt, or organic debris, you must install a high-efficiency mesh filter in your main water line. Micro-nozzles, especially the fogging and fine atomizing styles, contain small fluid passages that can easily clog if solid impurities are allowed to pass.

Technical Specifications

Frequently Asked Questions (FAQ)

Q: Can standard municipal tap water pressure run these impact rocker sprinklers?

A: Yes. A single impact sprinkler head requires approximately 1.5 to 2.0 bar of pressure, which is well within standard household municipal tap water ranges (usually 2.0 to 3.0 bar). However, if you are connecting more than 2 or 3 impact sprinklers to a single waterline simultaneously, the pressure will drop significantly, and a booster water pump must be installed.

Q: Why is an inline filter highly recommended when using fogging and micro-spray nozzles?

A: High-pressure fogging and atomizing nozzles use micro-sized apertures to shear the water into a fine mist. Even microscopic dirt particles or sand from your water supply can easily jam these tiny orifices. Installing a pre-filter at your water intake blocks these contaminants, preserving constant flow and preventing nozzle clog failure.